Spring Replacement Cost in Tulsa - What It Actually Costs, Quoted Free

Raised-panel steel

Carriage house

Modern flush

Full-view glass

LiftMaster openers

Chamberlain openers

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Spring Replacement Cost in Tulsa?

Spring repair in Tulsa typically runs $160 to $305 for a single spring, and that’s an estimated range for the work most homeowners call about. A matched pair is usually replaced together, so a pair costs about twice that. The written estimate sets the final price, and it’s free.

If your door slammed down and won’t lift, a broken torsion or extension spring is the usual reason. We replace it, balance the door, and check that the opener isn’t straining against a door that no longer weighs what it used to. Call Bedrock Garage Door Repair at (855) 962-5268 and we’ll get a technician out to look at it.

Key Takeaways

• One spring: typically $160 to $305 in Tulsa. A matched pair: about double.
• Most spring jobs are diagnosed and repaired in a single visit.
• Doors built before 1992 often have one spring; newer double doors usually have two.
• We work on doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
• Our technicians have up to 12 years of experience.
• The estimate is free, and we answer the phone 24/7.

Spring Replacement Cost Breakdown (2026)

Here’s how spring work breaks down for the Tulsa area. These are typical estimated ranges, not a fixed quote. Every door is weighed and measured before we name a price.

What pushes a spring job toward the top of the range? A heavy insulated door, a high-lift setup, a door with limited clearance above it, or a spring that’s been broken long enough to bend a track. What keeps it low? A standard single-car door with one spring and nothing else wrong. When a spring snaps, it often takes a cable or a roller with it, and that’s where a straightforward repair turns into a couple of line items. We tell you which ones you actually need.

What Affects Spring Replacement Pricing in Tulsa

• One spring or two. Older single-car doors usually run one spring. A double door on a two-car garage typically carries two, and replacing them as a matched pair is the standard approach because the second spring is usually as worn as the first. That’s the biggest single driver of the bill.
• Spring type and size. Torsion springs (mounted on a shaft above the door) and extension springs (running along the sides) are priced differently, and the wire gauge and length have to match the door’s weight. A heavier insulated door needs a heavier spring, and that costs more than the spring on a basic uninsulated panel door.
• Door weight and height. Tulsa homes range from old single-car garages to full two-car and oversized doors. A taller or heavier door means a larger spring and more labor to wind it correctly.
• What else broke with it. A snapping spring can damage cables, rollers or the opener. If your door has been stuck for a while and someone tried to force it, the track may be out of line too. Each of those is a separate line item.
• Opener strain. When a spring lets go, the opener starts lifting the full weight of the door. That’s hard on the motor and the gear assembly. If your opener has been noisy or sluggish since the spring broke, it’s worth having it checked in the same visit.
• Access and clearance. A garage packed to the ceiling, a low headroom setup, or a door that won’t open far enough to work on safely all add time to the job.

How a Spring Replacement Actually Goes

A torsion spring holds the entire weight of the door under heavy tension. That’s why this is not a job to take on yourself, and why we don’t walk homeowners through it. A spring under load can cause serious injury if it’s released wrong, and the winding bars involved are unforgiving. We handle it with the right tools and the door braced properly.

Here’s the general shape of a visit. We look at the door, confirm which spring failed, and check the cables, rollers and opener at the same time. We measure the door and match the replacement spring to its weight. Then we wind the new spring, balance the door so it holds position halfway up, and test the opener’s travel and safety reverse. Most spring jobs finish in one visit.

We work across the major brands, so if your door is a Clopay, Amarr or Wayne Dalton and your opener is a LiftMaster, Chamberlain, Genie, Craftsman or Raynor, we’ve seen the setup before. That brand familiarity cuts down on wrong parts and return trips.

Do You Need One Spring or a Pair?

If your door has two springs and one broke, replacing both is usually the right call. The second spring has lived the same life as the first, under the same load and the same number of cycles, so it’s typically close behind. Replacing one and waiting means paying for a second visit soon after. If your door has a single spring, one replacement is all there is. We’ll tell you which situation you’re in before any work starts, and the estimate reflects it.

How to Save on Spring Replacement

There’s no magic discount here, but a few practical moves keep the bill down:

• Fix it when it breaks. A door run on a broken spring puts the full weight on the opener. That’s how a spring repair turns into a spring repair plus an opener repair.
• Have the cables and rollers checked at the same time. One visit for two small issues beats two visits for one issue each.
• Don’t force the door. Prying a stuck door open can bend a track or kink a cable, and both add to the bill.
• Clear the area before we arrive. Easy access to the door saves labor time.
• Get the estimate in writing. We give you a free estimate up front, and the written estimate is the price. No surprises when the work is done.

Call (855) 962-5268 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Repair or Replace the Whole Door?

Usually, repair. A broken spring on an otherwise sound door is a spring job, not a door job. Replacement starts to make sense when the panels are rusted through, the door is badly out of square, or multiple parts have failed at once. New door installation in Tulsa typically runs $630 to $1,980 depending on size, material and insulation. We’ll give you the honest read on which side of that line your door is on, and we won’t push a new door when a repair will do. If a full replacement is the right answer, we handle installation too, so there’s no handoff to a different company.

FAQs – Spring Replacement Cost

How much does spring replacement cost in Tulsa?

Spring repair in Tulsa typically costs $160 to $305 for one spring, and a matched pair runs about twice that. The final price depends on the door’s weight, the spring type, and whether any cables or rollers need attention. Call (855) 962-5268 for a free estimate that’s specific to your door.

Is it cheaper to repair the spring or replace the whole door?

Repair is almost always cheaper. A spring replacement in the $160 to $305 range for one spring is far less than new door installation, which typically runs $630 to $1,980. Replacement only makes sense when the door itself is failing, not just the spring. Call (855) 962-5268 and we’ll tell you which one you’re looking at.

Can you replace my springs the same day?

Often, yes. Spring replacement is one of the most common jobs we handle, and most visits finish in a single trip once the right spring is matched to the door. Call (855) 962-5268. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening.

Why does a pair of springs cost about twice one spring?

Because it’s two springs and roughly twice the labor. A pair runs about twice the single-spring range of $160 to $305. When one spring on a two-spring door breaks, the other has the same wear, so replacing both together avoids a second visit soon after. Call (855) 962-5268 for an exact quote on your door.

My door is stuck open. Can you still fix it?

Yes. A door stuck open with a broken spring is a normal call, and we can usually get it closed and repaired in one visit. Don’t try to force it down yourself – a door with a failed spring can drop hard. Call (855) 962-5268. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Homeowners in Tulsa Call Us for Spring Work

We handle the full door lifecycle, from a snapped spring to opener repair to a complete new installation, so you’re not juggling a repair tech and an install crew. Our technicians have up to 12 years of experience, and they work on eight of the most widely installed brands in the country: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means the right part gets matched the first time, and the fix holds. We’d rather do the job correctly once than come back twice. It’s the standard the name suggests: load-bearing, dependable, built to last.

Get a Free Spring Replacement Estimate

If your spring has let go, don’t run the door on it. Call (855) 962-5268 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. We’ll tell you exactly what’s wrong, what it costs, and what the written estimate will say before we start. Licensed, insured, and straightforward about pricing.

Pricing reflects the Tulsa market as of 2026. Bedrock Garage Door Repair offers free estimates – call (855) 962-5268.

Written by the team at Bedrock Garage Door Repair.